acou.woodslat

 

Full acou.woodslat technical data sheet here

Standard Wood

  • acou.felt black only

  • Real wood veneer

Standard RAL

  • acou.felt black only

  • Any RAL lacquer colour

Custom Backing

  • Custom acoustic backing - 17 colour

  • Real wood veneer or any RAL colour slats

Custom Spacing

  • Vary wood slat spacing widths

  • Real wood veneer or any RAL colour slats

FR acou.woodslat

acou.woodslats are a highly versatile architectural and design-led acoustic wall finish, which can be used confidently within commercial, public and residential buildings due to each component being FR-rated.

  • FR acou.felt (Class B, s1, d0)

  • FR MDF slats (Class B, s1, d0)

  • FR any colour lacquer (Class B, s1, d0)

  • FR Real wood veneer slats

STANDARD FR
acou.woodslat, is of excellent quality, competitively priced and one of the most versatile wood slat products currently on the market.

The range is comprehensive and adaptable, incorporating a 12mm black acou.felt backing and either:

  • i. real wood veneer slats

  • ii. any RAL lacquer colour slats

CUSTOM FR VARIABLES:
Modify your design work with the following:

  • variable spacing between slats

  • variable slat widths

  • solid wood slats

  • size: H2400 W600 D21mm
    (min. order 2nr. panels)

  • NB. All custom design work must repeat every 600mm

FR Architectural Solid Wood Slat

FR Architectural Solid Wood Slat Architectural timber wood slat is a classic sound-absorbing wall finish utilised in many public buildings and commercial settings where sound quality is an important consideration.

acou.space can supply architectural solid timber wood slats.
Please contact us for more details.

12mm ACOUSTIC DATA

Acoustic Test Report

FR acou.woodslat Finishes

 

Product Properties

Sound Control

Acoustic performance

Class A / E

Other Properties

Semi rigid,
Non-toxic,
Non-allergenic,
Non-irritating
Stable and easy to clean

Recycled Material

dB

NCR: 12mm 0.35-0.9 24mm 0.75 - 0.9mm

Composition

Fully recyclable
100% polyester
90% post-consumer bottle flake PET

acoustic felt - Weight Msq
Standard Wood Slat Panel - Weight Msq

12mm - 1.8kg
6kg. (H2400 W600 D21mm - 10kg)

Fire Retardant

Fire Retardant

Class B, s1, d0

VOC emissions

<0.02mg / Msq (very low)

Harmful substances

OKEO TEX: STANDARD 100 - CLASS 1 (Very Low)

Formaldehyde

0.00UG/g (None)

Antiviral

Porous substrate shows a 68% reduction of SARS
CoV-2 in 15 minutes and >99% in 4 hours.

Antimicrobial

Tested to ISO 22196:2011 against common organisms such as E.coli, MRSA,It is proven to reduce the growth of these bacteria by up to 99.98%.

Silver-ion is a safe and naturally occurring technology inhibiting growth of bacteria and some tested viruses. It has longevity and inhibits bacterial malodours.

Safe and naturally occurring

Re-application

Not generally required. An spot cleaner is available from acou.space.

 

Acoustic felt products designed and supplied by acou.space are strong yet soft, sound-reducing material manufactured from 100% polyester fibre, of which a minimum of 65% is manufactured from recycled PET (polyethene terephthalate) bottle flake. It is both recycled and can be further recycled. All polyester is non-absorbent, and because of this, dust, dirt, and liquid will settle between and NOT into the fibres.

Dust:

  • Vacuum. Set the vacuum cleaner to the lowest setting and gently remove surface dust from the product's surface.

  • Be careful not to pull on fixings whilst vacuum cleaning.

Stain Removal:
General water-based stains:

  • Prompt action! Do not leave the stain to dry into the fibres.

  • Use plenty of water to dilute the stain.

  • Do not scrub the surface as this will cause pilling and raise the surface of the felt.

  • Most stains can be easily removed by transferring the stain from the surface onto a clean absorbent soft cotton cloth or paper towel by blotting.

  • Blotting will prevent the unwanted substance from being returned to the product or pushed further into the fibres.

  • Allow all surfaces to dry naturally.

  • DO NOT apply water near to electrical sources.

Oil-based stains:

• Dilute oil-based stains with water and detergent. (try on a small unobtrusive area first)

Summary:

  • Vacuum — Gentle/low speed

  • Waterborne stains — Dilute, blot, air dry

  • Oil-based stains — Dilute detergent with clear water – blot – air dry

  • Permanent marker and biro inks. — Treat as soon as possible. Apply MX14 as directed

  • Available from acou.space